COOLANT DISTRIBUTION UNITS (CDUs)

CoolIT AHx™ 180: Liquid-to-Air CDU for AI

Engineered for maximum performance, CoolIT Systems’ AHx™ 180 is a high-density, airflow-to-power optimized, liquid-to-air coolant distribution unit (CDU). The AHx180 CDU provides 180 kW cooling capacity with 1.5 LPM/kW flow in a 2-rack footprint for multiple artificial intelligence (AI), high performance computing (HPC) and high-density enterprise direct liquid-cooled (DLC) servers without requiring facility water.

Cooling Capacity
180 kW

Power Consumption
11.32 kW

Racks Managed
Up to 2 NVIDIA GB200 NVL72 racks

Facility Liquid Integration
No

COOLANT DISTRIBUTION UNITS (CDUs)

CoolIT AHx™ 180: Liquid-to-Air CDU for AI

CoolIT AHx180 liquid-to-air CDU internal view with pumps, touchscreen control panel, and stainless-steel piping
CoolIT AHx180 liquid-to-air coolant distribution unit with four integrated fans for high-density AI and HPC cooling.
CoolIT AHx180 liquid-to-air CDU internal view with pumps, touchscreen control panel, and stainless-steel piping
CoolIT AHx180 liquid-to-air coolant distribution unit with four integrated fans for high-density AI and HPC cooling.
Benefits
  • COOLING CAPACITY. High capacity liquid-to-air CDU at 180 kW.
  • FLOW PERFORMANCE. Over 1.5 LPM / kW to support high TDP chips. Delivers 270 LPM at a 40 psi under single-pump operation.
  • DENSITY. Highest performance in a two-rack footprint.
  • SYSTEM EFFICIENCY. Low CFM and power consumption per kW of heat dissipated. Dynamic heat load management for variable thermal loads.
  • HIGH AVAILABILITY. Built-in redundancies, continuous monitoring and hot-swappable components.
  • SERVICEABILITY. Field replaceable fans, pumps, piping and sensors.
  • NO FACILITY WATER REQUIRED. Supports common hot and cold aisle data center architecture.
Features

AHx180 Brochure Download

Download the AHx180 overview to explore CoolIT’s high‑performance air‑to‑liquid heat exchanger, designed to efficiently reject heat from liquid‑cooled racks while enabling scalable, facility‑friendly deployments with lower heat‑rejection requirements. An email will be sent with your download.

Download
CoolIT AHx180 liquid-to-air CDU internal view with pumps, touchscreen control panel, and stainless-steel piping

The AHx180 CDU for Dense AI in a Slim 2-Rack Footprint

The AHx180 is built for dense AI deployments where floor space is limited and downtime is not an option. Slim footprint, self-contained heat rejection, and 2N pump redundancy make it the fit for high-availability builds.

Dense AI in Existing Halls

A slim 2-rack footprint drops into tight aisle spacing without redesigning the floor plan. 180 kW of cooling capacity per unit supports high-TDP AI processors at 1.5 LPM/kW flow.

Colocation with Space Constraints

Where every rack unit costs money, a self-contained cabinet that rejects heat directly to room air saves floor space and removes the need for facility water plumbing.

Enterprise DLC with High-Availability Requirements

2N pump redundancy and continuous sensor monitoring protect mission-critical workloads. Either pump can carry the full cooling load if the other is offline.

CoolIT AHx180 liquid-to-air coolant distribution unit with four integrated fans for high-density AI and HPC cooling.
Redundancy By Design

Engineered for High Availability

The AHx180 is designed to keep cooling online through pump failures, fan failures, and in-service component swaps. Every critical part is either duplicated or field-replaceable, so a single event never takes the cluster down.

2N Pump Redundancy

Two high-performance pumps run in a 2N configuration. Either pump can carry the full cooling load on its own, so a pump failure does not interrupt cooling. Both pumps are field-replaceable without draining the loop.

N+1 Fan Array

Four high-efficiency fans run in an N+1 configuration. The AHx180 tolerates a single fan failure without loss of cooling capacity, and continuous sensor telemetry flags a degraded fan before it becomes a problem.

Field-Replaceable Everything

Fans, pumps, piping, and sensors are field-replaceable for in-place service. Integrated monitoring helps operators identify issues early, while CoolIT provides in-field service and spare parts in 80+ countries.

Frequently Asked Questions

Does the AHx180 require facility water?

How many NVIDIA GB200 NVL72 racks can one AHx180 cool?

How is redundancy handled in the AHx180?

What monitoring and control protocols does the AHx180 support?

Can I scale the AHx180 for larger AI clusters?

Can I deploy the AHx180 in an existing air-cooled data center?

News

Beyond single-phase versus two-phase: Why application, system and scale decide the right liquid cooling architecture

NOVEMBER 2, 2026

Tech Brief

Networking Cooling Tech Brief

OCTOBER 26, 2026

News

CoolIT and Stäubli Advance Direct-to-Plug Liquid Cooling with Next-Generation Optics

OCTOBER 12, 2026

News

The Next Gen AI CDU

OCTOBER 7, 2026

News

DCF Tours: Inside CoolIT, Where AI Liquid Cooling Goes to Scale

SEPTEMBER 28, 2026

Blog Posts

From Design to Data Center Floor: How CoolIT Builds Quality into Every Product 

SEPTEMBER 24, 2026

Blog Posts

Whitepaper: Single-Phase Direct Liquid Cooling Is Proven for the Next Decade of Ultra-Dense Compute

SEPTEMBER 21, 2026

Blog Posts

The Future is Fanless: 100% Heat Capture for Liquid Cooled AI Servers

SEPTEMBER 14, 2026

News

Scientific Computing World: Coldplate innovation: Raising the bar and the thermal ceiling

SEPTEMBER 2, 2026

News

Calgary Herald: AI data centre rush feeds expansion, hiring spree at Calgary tech darling CoolIT

AUGUST 31, 2026