CoolIT Systems

I have two Pumps, my original Freezone going on fours years old, and a relatively new one (never used) that sits with the discarded parts from the added Eliminator mod....

I ran some pump tests because of the age of my original pump....now I didn't do anything superscientific, just had two containers, one full of fluid, the other empty.....tested first my original pump, then tried out the newer Eliminator pump.....I used a timer, but, really the different flow rate was evident from the get go, eyeballing would have sufficed....

Was I ever floored, my original pump had some reallgood head pressure and great flow, while the newer pump from the Eliminator, while still fairly strong, was no match for the almost four year old pump in flow or head pressure....

So, unless each itineration has a different pump, there seems to be a large margin of performance difference from pump to pump, maybe year to year, and could explain some of the mysterious temperature problems that some units seem to experience when everything else checks out...

Musing while I wait for paint to dry...

laterzzzz........

Hmm, cool find. I have a few different coolit pumps kicking around. I might check this out while Im waiting for paint to dry. (All I do lately)

They all look the same inside/out so I never thought of trying that but it could explain some things.